CE-6000
Module&Pack
Regenerative Charge and Discharge Battery Testing System
High Frequency Isolation 10V～120V
It has the characteristics of high dynamic response speed, high stability precision and multi-channel flexible configuration which also supports pulse test, cycle life test and simulation test. The system has the function of multi-channel input and energy recovery, which can save a lot of electric energy consumed in the process of charging and discharging. Using bidirectional high-frequency DC converter topology and high-performance multi-channel 24 bit AD converter chip, the sampling resolution is higher than that of traditional single range equipment.
Use data to interprete module testing
-
100HzData Acquisition Frequency -
RS485 CommunicationCANBus -
＞90%Energy Conversion Efficiency -
Simulation -
SupportBMS Docking -
≥0VDischarge Voltage -
0.02%/0.05%Accuracy -
100msMin. Pulse Width -
≤3msResponse Time -
Parallel Channels
-
-
Lithium batteries for electric vehicles -
Lithium battery for electric bicycle -
Lithium battery for power tools -
Lithium batteries for garden tools -
Energy storage lithium battery
Delivering at once
Regenerative Charge and Discharge Module & PACK Testing System
Delivering at once
Low Frequency Isolation 60V～1200V Module & PACK Battery Testing System
Delivering at once
Low Frequency Isolation 60V～1200V Module & PACK Battery Testing System
Model Description
C
Product
T
①T/Empty
E
60
6 Series Module
&Pack
&Pack
04
Number of Channels
X
②D/T/Q/Empty
n
③n/m
□□□V
Maximum Output Voltage
(V)
(V)
□□□A
Maximum Output Current
(A)
(A)
IG
IGBT
B/F
Charge and Discharge Separation/
Discharge voltage below 0V
Discharge voltage below 0V
C
①
T
②
E
60
③
04
④
X
⑤
n
⑥
□□□V
⑦
□□□A
⑧
IG
⑨
B/F
⑩
①Product
②T/Empty
③6 Series Module&Pack
④Number of Channels
⑤D/T/Q/Empty
⑥n/m
⑦Maximum Output Voltage (V)
⑧Maximum Output Current (A)
⑨IGBT
⑩Charge and Discharge Separation/
Discharge voltage below 0V
①T-Accuracy: 0.02%FS；Empty-Default Accuracy: 0.05%FS or 0.1%FS；
②D-Double Range；T-3 Range；Q-4 Range; Empty-Single Range；
③n-100Hz；m-10Hz；
Typical Model
| 60V20A | 60V30A | 60V50A | 60V60A | 60V100A | 60V120A |
| 60V400A | 60V240A | 120V50A | 120V100A | 120V200A | 120V400A |
| 200V50A | 500V100A | 200V200A | 400V200A | 750V500A | 800V600A |
| -B (Charge and Discharge Port) / -F (Negative Pressure) Optional Functions | |||||
Software
Essential components
DBC Configuration Function
Discharge to 0V
Constant Current/Voltage Charge/Discharge Test
100ms Pulse Width
Simulation
系统支持DBC格式文件的导入/编辑/导出, 对不同协议的电池包, 无需升级程序, 修改代码, 只要编辑对应的 DBC协议文件, 即可实现通讯, 系统灵活又实用。
支持将电池包强制放电至0V，适用于各种电包安全测试、破坏性测试以及其他测试。
恒流恒压集成为一个工步，恒流充/放至指定电压后无缝切换至恒压模式对电池包进行补电，切换过程平滑无尖峰。
脉冲测试支持设置最小100ms脉冲宽度，能验证电池包在电流/功率快速变化下的性能。
支持对电池包进行工况模拟测试，通过加载路谱文件（excel&txt），对电池包进行实际使用的环境的模拟，验证电池包在真实使用下的性能。最大支持加载100W行变化数据。
Modularization of Power Unit
1Modular design is convenient to maintain equipment.
2DC and AC modules are used together, DC BUS is independent;
3Copper bar technology makes the equipment interior much cleaner.
System Protection
Power Grid Over/Under-voltage, AC
Short Circuit, Phase Protection
Short Circuit, Phase Protection
Power Grid Voltage Phase Sequence and Frequency Self Adaptation
Overheat Protection
Open/Short Circuit Protection
Emergency Stop Protection
Voltage and Current Protection Value can be Set
Output Overvoltage/Overcurrent Protection
Channel Redundant Voltage Protection
DC Acute Reverse Connection Protection
Self-checking Protection
Equipment Power off Continuity Protection
Protection Log Traceability
Integrated Operation and Collaborative Work through BTS Upper Computer Control System
NEWARE battery charge and discharge test system realizes integrated operation and collaborative work through BTS upper computer control system, so as to maximize the battery characteristics and functions.
Peripheral Linkage
1BMS Protection Board Linkage
2Thermostat Linkage
3Water Cooling Machine Linkage
4Balance Equipment Linkage
Close to 100% Energy Recovery
Full Power Feedback Technology; Energy-feedback efficiency is more than 90%; Battery discharge energy is recycled and used for charging in other channels. If there is energy surplus, it will be fed back to the grid.
Size & Weight
① W*D*H : 600*800*1800(mm)；Weight: 300kg。
② W*D*H : 600*800*1200(mm)； Weight: 200kg。
② W*D*H : 600*800*1200(mm)； Weight: 200kg。
Global - English
