CT-4008Q-5V12A (4 Range)

Constant Voltage Range Control: 10mV~5V；

Minimum Discharge Voltage: Upper and lower clamps can discharge to 2V, and 2m wire length can reach 2.5V;

Accuracy: ± 0.01% of FS；

Stability: ± 0.02% of FS；

Output Range per Channel: 0.2mA-0.1A；0.1A-0.5A；0.5A~6A；6A-12A；

Accuracy: ± 0.01% of FS；

Constant Voltage Cut-off Current: 0.1mA；0.5mA；6mA；12mA；

Stability: ± 0.02% of FS；

Single Channel Maximum Output Power: 60W； 

Stability: ± 0.03% of FS；

Current Response Time (10%FS~90%FS)

≤1.5ms；

Step Time Range

① ≤(365*24) h/step；② Time Format Support  00：00：00：00(h, min, s, ms)

Data Recording Conditions

Minimum Time Interval: 10ms； 

Minimum Voltage Interval: 5mV； 

Minimum Current Interval: 0.1mA；0.5mA；6mA；12mA；

Data Acquisition Frequency

100Hz；

Charging Mode: Constant Current Charging, Constant Voltage Charging, Constant Current/ Constant Voltage Charging, Constant Power Charging;

Cut-off Conditions: Voltage, Current, Relative Time, Capacity, Energy, -△V;

Discharge Mode: Constant Current Discharge, Constant Voltage Discharge, Constant Current/ Voltage Discharge, Constant Power Discharge and Constant Resistance Discharge;

Cut-off Conditions: Voltage, Current, Relative Time, Capacity and Energy;

Charging: Constant Current Mode, Constant Power Mode;

Discharge: Constant Current Mode, Constant Power Mode;

Minimum Pulse Width: 500ms；

Pulse Number: a single pulse step supports 32 different pulses;

Continuous Switching between Charging and Discharging: One Pulse Step can Realize Continuous Switching from Charging to Discharging;

Cut-off Conditions: Voltage, Relative time;

Cycle Test Range：1~65535 Times;

Single Cycle Steps：254;

Loop nesting: it has the function of nested loop and supports up to 3 levels of nesting;

Power down Data Protection;

Function of Offline Test;

The safety protection conditions can be set, and the setting specs include: upper voltage limit, lower voltage limit, upper current limit, lower current limit, upper capacity limit and delay time.