Hot
Hardware Connection
-
If you don't know how to connect the equipment?中位机与下位机串口连接，两个口为并口，任取其一；下位机与下位机连接，也是任意其中一口一直往下扩展；只有一台中位机的时候，中位机上的网口与电脑网口相连，如有多台中位机的时候，中位机网口插入的网线，接入到交换机网口，或者是路由器的LAN口。
-
If you don't know how to use clamps?夹具线都有正负极线码管，可根据V＋，I+，V-，I-来接线。
-
The middle machine can be connected, but the lower machine can not be connected.The middle machine can be connected, but the lower machine can not be connected.
-
How to modify the repeated equipment number about 3008/ 4008 series?使用我司校准软件完成箱号修改内容。
-
If you find there's no channel display on software, when you connect the new equipment with the previous equipment in the same series. What should you do?新设备过去需要通过中位机重新搜索一下新到的设备，重新映射一次即可。
-
After automatic disconnection, you find it automatic connection again.检查下电脑到交换机及设备间的网络连接是否正常。
-
If ther are 10 equipments mapping, there are only 8 equipments display.客户端默认1*8映射方式，可以更改客户端配置文件选择1*16。
-
You are prompted IP conflict or IP occupied when you set IP.可配合按键与液晶屏设定IP地址。
Global - English
